لوله آتشخوار A179

لوله آتشخوار A179 با استاندارد DIN17175

قطر لوله ها از 1.8 اینچ تا 3 اینچ و بصورت میلیمتری از قطر 3.2 الی 76.2mm می باشد.

مشخصاتی که ذکر شد لوله ای را با کربن کم و ضخامت کم که بصورت کشش سرد تولیده شده است و فرایند انتقال حرارت را به خوبی انجام و با ترکیب شیمیایی که از ترکیبات کربن، منگنز، فسفر، گوگرد و آزمایش مکانیکی تحت آزمون کشش و خمش جوابگو می باشد.

این گروه از لوله های فولادی آتشخوار مناسب برای ساخت مبدل های حرارتی،کوندانسور و انتقال دهنده های حرارتی مشابه می باشد.

 

:  Structural and constructional steels

 

  A179:   ASTM A 179 / A 179M Seamless cold drawn low carbon steel heat exchanger and condenser tubes

--------------------------------


This specification covers tubes 1/8 to 3 in  3.2 to 76.2 mm 

inclusive, in outside diameter. Note 1Tubing smaller in outside 

diameter and having a thinner wall than indicated in this 

specification is available. Mechanical property requirements 

do not apply to tubing smaller than 1/8 in. [3.2 mm] in outside 

diameter or with a wall thickness under 0.015 in 0.4 mm

This specification covers minimum-wall thickness, seamless cold-drawn low-carbon steel tubes for tubular heat exchangers, condensers, and similar heat transfer apparatus. Tubes shall be made by the seamless process and shall be cold drawn. Heat and product analysis shall be performed wherein steel materials shall conform to required chemical compositions of carbon, manganese, phosphorus, and sulfur. The steel materials shall also undergo hardness test, flattening test, flaring test, flange test, and hydrostatic test.